Two apartments, one eighth-floor rooftop in the Adelaide CBD and a crane lift on a closed street. Watch Stratco's video of the job, or read the full story below.
Two apartment owners at the Tivoli apartment building, 261 Pirie Street in the Adelaide CBD, wanted covered outdoor living on their rooftop terraces, eight floors above the street. Each wanted something different, and both were built as Stratco Outback patios, with Budget Built as the Stratco Authorised Outback Dealer.
Building a patio on a rooftop is straightforward once the materials are there. Getting them there was the hard part. Steel beams, posts and roof panels can't go up in a lift, so everything had to be craned onto the roof.
Luke worked with Morgan Cranes to plan the lift for a Saturday morning, when council regulations required the whole street to be blocked off. He coordinated with his Stratco representative, David, so the materials were manufactured in time and delivered early that morning from Stratco Gepps Cross, and with the crane company so the truck and crane arrived on schedule.
Apart from some rain that morning, everything went to plan. The materials for both roofs were lifted onto the rooftop in three to four hours.
The first owner wanted as much sunlight and ventilation as possible, but also the option to close the roof against rain. We built an opening louvre roof on a cream steel frame. With the blades open the terrace gets sun and a breeze; closed, it's a waterproof roof.
The second owner decided an insulated roof suited his terrace better. Insulated roof panels give a ceiling-like finish underneath and keep the space cooler, which matters on an exposed rooftop. The result is a covered outdoor dining area right outside the apartment's sliding doors.
"For the most part, the biggest problem we had to overcome was actually getting this equipment and material up here. Credit to Stratco and Morgan Cranes and the boys from Budget Built Home Additions, we got it through within three, four hours." Luke Urban-Henderson, Managing Director
Location: Apartment block on Pirie Street, Adelaide CBD
Built: two Stratco Outback rooftop patios, one with an opening louvre roof and one with an insulated roof
Lifting: Morgan Cranes, Saturday morning, street closed under council regulations, done in three to four hours
Supplier: Stratco, Gepps Cross
Featured by Stratco: "HowTo Install Patios On An Apartment Block", on the Stratco blog
Read Stratco's write-up of the jobApartment rooftops and terraces need extra planning for access, lifting, wind and the building's own requirements. We handle the logistics so you just see the finished roof. See our patio and louvre roof options.
Patios, pergolas and verandahsRooftops, tight access, sloping blocks or heritage homes: talk to Luke about your project and get a free, no-obligation quote.